Removal and replacement procedures 51
Expansion board
Your ProLiant server has four expansion slots with four separate bus channels.
Item Connector code Slot type
1 Full-height full-length Slot 4 PCIe x16 (16) 45W Full-height/full-length PCIe Gen2 x16 slot (x16)
2
Full-height full-length Slot 3 PCIe x8 (4) 25W Full-height/full-length PCIe Gen1 x8 slot (x4)
3
Full-height full-length Slot 2 PCI 32-bit 33 MHz 25W Full-height/full-length 32-bit/33 MHz PCI slot
4
Full-height half-length Slot 1 PCIe x4 (1) 25W Full-height/half-length PCIe Gen1 x4 slot (x1)
To install an expansion board:
1. Perform the pre-installation procedure.
2. Prepare the system for the expansion board installation.
a. Loosen the expansion slot cover retainer thumbscrew (1).
b. Detach the expansion slot cover retainer from the chassis (2).
To Next Page
Loading...
