Removal and replacement procedures 53
14. Remove the processor from the processor retaining bracket.
CAUTION: To avoid damage to the system board:
• Do not touch the processor socket contacts.
• Always install the processor socket cover after removing the processor from the socket.
• Do not tilt or slide the processor when lowering the processor into the socket.
CAUTION: Removal of the processor or heatsink renders the thermal layer between the
processor and heatsink useless. Clean the component with the provided alcohol swab, then add
thermal grease.
15. Place the processor on a static-dissipating work surface or inside an anti-static bag.
16. Remove the failed system board.
To Next Page
Loading...
