Ta ble 3 Installation and Configurati on checklist
Steps
Reference
1. Unpack server, check kit
contents, and become familiar
with front and back panels of
storage server. Locate and
write down serial number of
storage server.
See "Checking kit
contents"onpage19.
2. If you purchased the
Tower to Rack conversion kit,
complete the rail installation
instructions.
See the HP ProLiant rail
installation instructions, if
applicable.
3. Connect cables; (optional)
connect a keyboard, mouse,
and monitor; power on server,
and log in to the ser ver.
See "Cabling the
server"onpage23,
Powering on the server,and
Direct at tach method.
4. Access the HP Storage
Server Management console.
• Direct attach method
• Remote browse method
• Remote desktop method
• iLO 2 method
See "Accessing
the H P Storage
Server Management
console"onpage29.
5. Complete the storage server
configuration worksheet.
See "Server configuration
worksheet" on page 37.
6. Run Rapid Startup Wizard. See "Rapid Startup
Wi zard"onpage40.
7. C o m p l e t e sy s t e m
configuration.
See "Complete sy stem
configuration" on page 41.
8. Configure storage server
for Web access, if necessary.
See "Configuring storage
s
erver for Web access
(opti
onal)" on page 43.
HPProLiantML350G5StorageServer
17
To Next Page
Loading...
