3 Accessing the HP Storage
Server Managem ent console
Before a ccessing the HP Storage Server Management console, verify that
the storage server is co mpletely installed in the rack, and that all cables
and cords are connected.
To access the HP Storage Server Management console, you can use these
access methods:
Direct attach To connect directly to the storage server
without using the net work.
Remote browser To establish a browser-based
connection to the HP ProLiant Storage
Server Management console from a
remote client running Internet Explorer
5.5 (or later).
Remote desktop To establish a connection from a remote
client without using a browser. This
method requires the client to have
Windows remote desktop capability.
HP Integrated Lights-Out
2(iLO2)
To establish a browser-based connection
from a remote client using the iLO 2
interface.
For more information, see " Planning for installation"onpage13.
IMPORTANT:
An IP address ca n be substituted for a storage server’s serial number and
h yphen when using either remote browser or remote desktop methods
to access the HP Storage Ser ver Management console. For example:
192
.0.0.1 can be substituted for TWT08466-.
Using the Direct attach method
You can access the HP Storage Server Management console using a
monitor, mouse, and keyboard directly attached to the storage server.
To connect the storage ser ver to a network using the direct attach method
HPProLiantML350G5StorageServer
29
To Next Page
Loading...
