NOTE:
Connecting the power cord illuminates the LEDs on the front of the bezel,
the Systems Insight Display LED, and the LEDs on the NIC connector
(rear panel). The iLO 2 NIC LED (rear panel) illuminates if the iLO 2
port is connected. Connecting the power cord also restores the storage
server to whatever previous powered state it was last in. This could result
in the server powering up , the fans operating, and the pow er indicator
coming on.
NOTE:
The keyboard, mouse, and monitor are used only for the "Direct attach
method"onpage29.Theyarenotprovidedwithyourstorageserver.
HPProLiantML350G5StorageServer
25
To Next Page
Loading...
