Hardware options installation 63
8.
Install the non-hot-plug drive on the blank and attach the screws.
9. Install the drive into the drive bay.
10. For tower models, do the following:
a. Install the access panel (on page 26).
b. Return the server to an upright position.
11. For rack models, do the following:
a. Install the access panel (on page 26).
b. Slide the server back into the rack.
12. Power up the server (on page 22).
13. Do one of the following:
o For tower models, install the bezel ("Install the tower bezel" on page 23).
o For rack models, if removed, install the security bezel ("Security bezel option" on page 47).
To Next Page
Loading...
