EL-MF877-00 Page 12
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Unscrew the 2 screws on the 3
dummy covers, see photo 1 and 2
Lock the 2 screws,see photo 6
Put one screwdriver head into the screw
hole and pull the dummy cover outward,
use same method to dissemble the 3
dummy covers
Assemble the Webcam, MSR,BIO
to the unit and lock the two screw
red marked See Photo 4 Confirm the
Webcam, MSR,BIO assembled rightly
see photo 5
Disassembly process (MSR,Webcam,BIO)
To Next Page
Loading...
