EL-MF877-00 Page 7
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Assembling the HDD bracket to the unit
and lock the 2pcs screws, see photo 6
（T15）3.0+/-0.3kgf.cm
Disassembly process (Do not remove the HDD cage)
Assemble the first SSD Card to the
SSD1 mark(left position)connector
byone hand, and hold the
Mylar by another hand
see photo 1
Press the SSD to confirm it insert
rightly, and lock the screw to fix the SSD
on the MB, pull the Mylar aside at same
time, see photo 2
To Next Page
Loading...
