To set Shutter values
Select 1. from the Scene Mode submenu.
Press 2. OK button
to enter the adjust mode.
Use the 3.
or keys to select the shutter value options.
Press the 4. Shutter button
to capture the image.
Displays the shutter value
Using Manual Exposure
When the camera is in the manual exposure mode, you can change either aperture or shutter speed, or both.
To activate Manual Exposure
Select 1. from the Scene Mode submenu.
Press 2. OK button
to enter the adjust mode.
Use the 3.
or keys to select the shutter speed.
Or, use the 4.
or keys to select the aperture value.
Use the 5. OK button
to switch between aperture and
shutter speed adjustment and vice versa.
Displays the aperture and shutter
speed value
Press the 6. Shutter button to capture the image.
Using Voice Recording
From the Scene menu, select 1. . The Voice Recording screen
layout is displayed on the LCD screen.
Press the 2. Shutter button
to start recording.
Press the 3. Shutter button
again to stop recording.
Setting the Drive Mode
This camera features a Self-timer and Burst which can be set in the Burst mode function in the Record Menu. The
Self-timer will take photos after a predefined delay. The burst will take consecutive shots. This function is only
available in Photo mode. The Burst mode setting is automatically set to off when you turn off the camera.
To Next Page
Loading...
