HP SC20 - Page 27

QuickSpecs
hp AlphaServer SC20
DA-10976 North America — Version 1 — May 24, 2002 27
Technical Specifications
ELECTRICAL (Power supplies are universal, PFC, auto ranging, 100/240 VAC)
Compute Building Blocks
SC40/45 (continued)
Nominal Voltage (VAC)
200 to 240
Voltage Range (VAC)
temporary condition
180 to 250
Power Source Phase
Single
Nominal Frequency (Hz)
50/60
Frequency Range (Hz)
49 to 51/59 to 61
RMS Current
(maximum steady state)
Each power cord 16 A
Power Cords
Rack AC Inlet 3M (10 ft) 10 per
Power Distribution
Unit, 2 per U possible
NEMA L6-20 (North
America) or IEC 320
C14 (other countries)
DA-SCAAC-BA/BB 2
Number of
Power Cords
DA-SCAAD-BA/BB 2
DA-SCAAD-TA/TB 2
Dimensions (H x W x D)
13.87 x 17.6 x 30.1 in/35.2 x 44.7 x 76.5 cm
(fits 14 in [8U] standard RETMA cabinet)
Shipping Dimensions
28.8 x 24 x 40 in/73.2 x 60.7 x 101.6 cm
AS SC45/40 Base Building Block
(Rackmount Node System Drawer)
Part Number: DA-64CBA-AL
Part Number: DA-68DBA-AL
Weight
When lifting: Nominal 110 lb/50 kg
Maximum 167.2 lb/76 kg
Nominal 130 lb/59 kg Total added to cabinet (brackets,
slides, cables):
Maximum 202.4 lb/92 kg
Shipping Weight
Nominal 158 lb/72 kg
Maximum 233 lb/106 kg
Clearances
Operating See specific cabinet requirements
Service Minimum 4 ft/121.9 cm, 30 in/76.3 cm
withdrawal on rails
Dimensions (H x W x D)
5.1 x 17.6 x 19.0 in/13 x 45 x 48.0 cm
(fits 8.75 in [3U] in standard H9A15-S cabinet)
Management Server Rackmount
DS10 (each)
Part Number: DA-SCMAB-AA
Shipping Dimensions
Weight
Nominal 36 lb/16.3 kg
Maximum 36 lb/16.3 kg
Clearances
Operating See specific cabinet requirements
Service Minimum 4 ft/121.9 cm