HP SCSI User Manual

1. 48x IDE (ATAPI) CD-ROM 5. Four DIMM Sockets, for up to 4GB DDR memory
2. Removable Media Bays 6. System Fan
3. Four Hot-Plug (shown) or Four Non hot-plug (not shown)
Drive Bays
7. 350W Power Supply
4. Four Expansion Slots (Two PCI-X, One PCI, and One PCI
Express)
At A Glance
Supports a single 3.0 GHz, 3.20 GHz, or 3.40 GHz Intel® Pentium® 4 processor with 1MB or 2MB cache size or a
single 2.8 GHz Intel Celeron processor with 256KB cache size.
Intel® Pentium® 4 processors include support for Hyper-Threading
Intel E7221 Chipset supporting 800MHz FSB (with Pentium 4 processor) or 533MHz FSB (with Celeron processor)
PC3200 400MHz DDR SDRAM with advanced unbuffered ECC capabilities and optional interleaving (expandable up
to 4 GB)
Embedded NC7761 PCI 10/100/1000T Gigabit network adapter
Four Expansion Slots: Two PCI-X 64-bit/100MHz, One PCI 32-bit/33MHz slot, One PCI Express slot (X8 connector, x4
speed)
SCSI models include
Single Channel Ultra320 SCSI Adapter in PCI-X slot
SATA models include
Integrated four Channel SATA Controller
Four USB 2.0 ports - Two on front, two on rear
ROM Based Setup Utility (RBSU) and PXE support
Protected by HP Services including a one-year, Next Business Day limited global warranty - Certain restrictions and
exclusions apply.
QuickSpecs
HP ProLiant ML310 Generation 2
Overview
DA - 12168 Worldwide QuickSpecs — Version 28 — 3-24-2006 Page 1

HP SCSI Specifications

General

Interface	SCSI
Application	Server
Compatibility	HP Servers
Connector Type	68-pin
Cable Length	Varies by model
Supported Devices	Hard drives, tape drives

Summary

Standard Server Features

Processor and Memory Specifications

Details on supported processors, cache, and memory types and capacities.

Manageability, Software, and Support

OS Support and Factory Services

Lists supported OS, rack airflow requirements, and HP Factory Express services.

Server Models and Configurations

HP ProLiant ML310 G2: 3.4GHz Models

Details on configurations with 3.4GHz Intel Pentium 4 processors.

HP ProLiant ML310 G2: 3.2GHz Models

Details on configurations with 3.2GHz Intel Pentium 4 or Celeron processors.

Configuration Information: Factory Integration

Base and Required Configuration Steps

Steps 1 & 2 for base chassis selection and core component configuration.

Factory Drive Configuration Options

Options: Software, Management, and Interfaces

ProLiant Essentials Value Pack Software

Management and Serial Console Options

Options: Tape, Autoloaders, and Libraries

Options: UPS, PDUs, and Rack Equipment

Uninterruptible Power System (UPS) Options

Storage

Drive Support and Options: SCSI, SAS, SATA

Details on all internal drive types and support across SCSI, SAS, and SATA.

Technical Specifications

System Unit, Power, and Environmental Specs

Details on dimensions, weight, input, power supply, temperature, humidity, and noise.

Storage Device Technical Specifications

Technical specs for SCSI drives, SATA drives, and CD-ROM drives.

Controller and Network Adapter Specifications