Need help?Do you have a question about the HP SimpliVity 380 Gen9 and is the answer not in the manual?
General| Form Factor | 2U Rack |
|---|---|
| Processor | Intel Xeon E5-2600 v4 series |
| Memory | Up to 768 GB |
| Networking | 4 x 1GbE |
| Power Supply | Dual redundant power supplies |
| Management | HP OneView, iLO 4 |
Details on the processor, drives, memory, power supplies, and expansion slots of the HPE SimpliVity 380 server.
Procedures and precautions to protect server components from electrostatic discharge (ESD) during installation.
Step-by-step procedure for physically installing the HPE SimpliVity 380 server into a rack using slide rails.
Procedure for powering on the HPE SimpliVity 380 server and verifying its operational status.
Steps to configure the iLO port for out-of-band web-based management, including IP address settings.
Interpreting Accelerator card LEDs, diagnosing failures, and troubleshooting detection issues.
Procedure to revert an Accelerator card to its backup firmware to resolve load failures or communication issues.
Step-by-step procedure for removing a failed or failing solid state drive (SSD) from the HPE SimpliVity 380 server.
Step-by-step procedure for installing a replacement solid state drive (SSD) or filler panel into the server.
Procedure for safely removing a failed or failing power supply from the HPE SimpliVity 380 server.
Procedure for installing a replacement power supply or filler panel into the HPE SimpliVity 380 server.
To Next Page