Chapter 4: Server troubleshooting 20
Chapter 4: Server troubleshooting
This section contains the following topics:
• Diagnostic indicators
• Drive monitoring
• Power supply monitoring
• Accelerator card monitoring
• Network interface monitoring
You can use the diagnostic indicators and LEDs to identify problems with the server hardware. For assistance
with resolving hardware problems, such as a component failing, contact Customer Support (http://
www.hpe.com/support/hpesc).
Diagnostic indicators
The right side of the front panel on an HPE SimpliVity 380 server provides diagnostic LEDs that indicate when
the server is functioning properly and when a hardware-related error occurs. The indicators can help you correct
problems before they affect service levels.
Callout Function LED State
Off No power is present.
Steady green The server powered up
Flashing green Performing power up sequence
1 Power
Solid amber System in standby mode
To Next Page
Loading...
