Boot
In addition to POST, boot includes the following tasks after POST is complete:
• Performs universal port configuration.
• Initializes links.
• Analyzes fabric. If any ports are connected to other switches, the switch participates in a fabric
configuration.
• Obtains a domain ID and assigns port addresses.
• Constructs unicast routing tables.
• Enables normal port operation.
Supported HBAs and CNAs
NOTE:
Converged Network Adapters (CNAs) apply to the FCoE Converged Network Switch only.
For a list of HBAs that have been tested and are known to work with the SAN switches, refer to the
latest version of the HP StorageWorks SAN design reference guide: http://www.hp.com/go/
sandesignguide.
8-Gb SAN Switch hardware reference manual 91
To Next Page
Loading...
Need help?
General