DescriptionItem
Return mail address. To receive the reply to another mail address, specify the address
by using ReturnAddress.
ReturnAddress
The number of the mail addresses that have been registered as a destination.UsedCount
Mail addresses of a destination. Thirty-two addresses are always displayed.
If a mail address is not specified, {-,-} is displayed instead of mail address and attribute.
ToAddressList
Attributes (TO, CC, or BCC) of the destination mail addresses.Attribute
The number of the displayed destination mail addresses. The displayed mail addresses
may not have an account setting.
Num. of Accounts
Valid Flag Update Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Email Info],Valid Flag Update,,
Normal end,,,Seq.=xxxxx
+MailNoticeSetting=Enable
[Email Info]
Email Info function
Valid Flag Update
Valid Flag Update operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 76.
Table 76 Valid Flag Update Operation
DescriptionItem
Indicates whether the mail notice is enabled or disabled. Disable or Enable will appear.MailNoticeSetting
Email Info Function122
To Next Page
Loading...
