What to do if HP Storage returns DATASET_ERROR_DATASET_NOT_FOUND?
If you encounter a DATASET_ERROR_DATASET_NOT_FOUND error, verify that the actual dataset name matches the specified dataset name. To check the dataset name, you can use the MF-File list command in the FCU Help menu or the VTOC dump data on the mainframe host.
How to fix HP Storage Remote Web Console when it hangs?
If the HP Storage Remote Web Console hangs or Cnt Ac-J Z operations malfunction, first ensure the issue isn't with your computer, Ethernet hardware, or software by restarting the computer. Verify that all Cnt Ac-J Z requirements are met, and that the primary/secondary systems and remote copy connections are powered on with operational NVS and cache. Double-check all entered values and parameters for accuracy in the Remote Web Console. Avoid using Performance Monitor during these operations.
What to do if HP Storage pair create operation resulted in a timeout error?
If a pair create or resync operation on your HP Storage results in a timeout error, and a SIM was generated due to a hardware failure, call HP Technical Support after the problem is solved, then retry Cnt Ac-J Z operations. If no SIM was generated, wait 5-6 minutes and check the pair status. If the status changed correctly, the operation completed after the timeout. If the status did not change, retry the operation during a lighter workload. If there is a communication error between the Remote Web Console and the SVP, consult the HP StorageWorks P9000 Remote Web Console User Guide.
What causes DATASET_ERROR_VOLUME_DEFINED_READ_ONLY in HP Storage?
If you encounter the DATASET_ERROR_VOLUME_DEFINED_READ_ONLY error, ensure that the target dataset for an open-system write operation is on a 3390-3A/C volume.
What to do if a Business Copy error message is displayed on HP StorageWorks P9000 Remote Web Console?
If a Business Copy error message appears on the Remote Web Console during an operation, select the failed volume in the Preview List on the Pair Operation window, right-click to display the menu, and then click Error Detail. Consult HP StorageWorks P9000 Remote Web Console Messages for a list of error codes and corrective actions.
What causes FCU errors when accessing an FCU parameter definition file in HP StorageWorks P9000 Storage on Windows?
If FCU reports errors when accessing an FCU parameter definition file on Windows systems, remove all space lines from the FCU parameter definition files. FCU versions 01-01-36 and later do not support space lines, while FCU versions 01-01-24 and earlier supported space lines when run without the GUI.
How to recover from HP StorageWorks P9000 Storage Initial Copy Failed error?
If the primary HP Storage system suspended a pair during the initial copy operation, indicating the data on the S-VOL isn't identical to the P-VOL (possibly due to an invalid track format), release the pair from the primary storage system. Clear all error conditions at the primary storage system, the P-VOL, the secondary storage system, and the S-VOL. Reformat failed tracks using ICKDSF, and restart the initial copy operation using the Add Pair dialog box.
What does MCU P/S-OFF mean in HP Storage?
If the primary HP Storage system suspended all Cnt Ac-J Z pairs because it was powered off, no action is needed. The primary system automatically restores these pairs when it's powered back on.
How to fix missing LUN mapping information in HP StorageWorks P9000 mapping reports?
Missing LUN mapping information in the mapping reports can occur if read permission has not been assigned on corresponding OS device special files. Assign read permission to device special files to resolve this.
How to troubleshoot HP StorageWorks P9000 Storage Communication Failed error?
If communication fails on your HP Storage, meaning the primary system connects to the secondary system but a logical communication timeout occurs, ensure that the secondary system port and network relay devices (cables, switches) are properly configured and functioning.
General| RAID Support | RAID 0, 1, 5, 6, 10 |
|---|---|
| Interface | Fibre Channel, iSCSI, FCoE |
| Form Factor | Rack-mountable |
| Model | P9000 |
| Operating System Compatibility | Windows, Linux, VMware, HP-UX |
| Host Interface | Fibre Channel, iSCSI, FCoE |
| Drive Interface | SAS, SSD |
| Drive Types Supported | SSD, SAS |
| Redundancy | Redundant controllers, power supplies, and fans |
| Management Software | HP StorageWorks Command View |
General introduction to the Data Exchange Code Converter functionality and its purpose.
Describes the operational flow and components involved in the Data Exchange Code Converter.
Details the process of converting alphanumeric character data, focusing on single-byte codes.
Explains double-byte character conversion, including mixed single and double-byte data.
Covers the conversion of numeric data fields, including process flow.
Lists the necessary hardware, software, and release notes for the Code Converter.
Details the files and their locations provided on the installation media for UNIX.
Step-by-step guide for installing, uninstalling, and upgrading on UNIX systems.
Explains how to input the license key required for Code Converter operation.
Illustrates the user's workflow for performing data conversion operations.
Describes the supported record formats and field positions for data files.
Introduces MTO conversion, including EBCDIC to ASCII and IBM Traditional Chinese to Big5.
Details the specific conversion of alphanumeric fields in MTO.
Introduces OTM conversion, including ASCII to EBCDIC and Big5 to IBM Traditional Chinese.
Explains how to customize the code conversion table for OTM.
Details the conversion of packed decimal numeric data.
Explains the process for converting zoned decimal numeric data.
Provides a high-level overview of the code conversion table customization process.
Describes the syntax rules for defining conversion statements used in customization.
Explains the command syntax for customizing tables on UNIX systems.
Lists and explains common error codes and their meanings.
Details the format and interpretation of messages generated by the ccnv utility.
Provides guidance on what information to gather before contacting HP support.
Lists other relevant HP documents for further information.
Information on how to obtain technical support from HP.
To Next Page