HP StorageWorks P9000 User Manual

Overview of the Data Exchange Code Converter Installation
The following figure shows an overview of the Data Exchange Code Converter installation process.
In order to use the Data Exchange Code Converter, you must first install the File Conversion Utility
(FCU) and then install Code Converter. For details on installing the File Conversion Utility, see the HP
StorageWorks P9000 Data Exchange User Guide.
Figure 14 Installation Overview
.
Installation Media for UNIX-based Systems
The Data Exchange Code Converter Installation Utility files for UNIX systems are listed in the following
table. Data Exchange Code Converter provides the following files in tar (tape archive) format. These
files are contained in an accompanying compact disk.
Table 2 Code Converter Utility Files for UNIX Systems
Installation
Location
ContentsFile Name
/usr/lib
UOC double-byte conversion function's object. Replace with a dummy
object provided by FAL/FCU.
libuoc.*
(Note 1)
FAL/FCU boot
directory
ini file used by the double-byte code conversion routinecodetran.ini
standard table for mto conversion
IBM Traditional Chinese–>Big5
conversion table
HOSTBIG5.tbl
standard table for otm conversion
Big5–>IBM Traditional Chinese
conversion table
BIG5HOST.tbl
Edit Option fileEditOpFile
System Requirements and Installation30

HP StorageWorks P9000 Specifications

General

Brand	HP
Model	StorageWorks P9000
Category	Storage
Language	English