To Next PageTo Next Page
What to do if HP Storage returns DATASET_ERROR_DATASET_NOT_FOUND?
If you encounter a DATASET_ERROR_DATASET_NOT_FOUND error, verify that the actual dataset name matches the specified dataset name. To check the dataset name, you can use the MF-File list command in the FCU Help menu or the VTOC dump data on the mainframe host.
How to fix HP Storage Remote Web Console when it hangs?
If the HP Storage Remote Web Console hangs or Cnt Ac-J Z operations malfunction, first ensure the issue isn't with your computer, Ethernet hardware, or software by restarting the computer. Verify that all Cnt Ac-J Z requirements are met, and that the primary/secondary systems and remote copy connections are powered on with operational NVS and cache. Double-check all entered values and parameters for accuracy in the Remote Web Console. Avoid using Performance Monitor during these operations.
What to do if HP Storage pair create operation resulted in a timeout error?
If a pair create or resync operation on your HP Storage results in a timeout error, and a SIM was generated due to a hardware failure, call HP Technical Support after the problem is solved, then retry Cnt Ac-J Z operations. If no SIM was generated, wait 5-6 minutes and check the pair status. If the status changed correctly, the operation completed after the timeout. If the status did not change, retry the operation during a lighter workload. If there is a communication error between the Remote Web Console and the SVP, consult the HP StorageWorks P9000 Remote Web Console User Guide.
What causes DATASET_ERROR_VOLUME_DEFINED_READ_ONLY in HP Storage?
If you encounter the DATASET_ERROR_VOLUME_DEFINED_READ_ONLY error, ensure that the target dataset for an open-system write operation is on a 3390-3A/C volume.
What to do if only Exit and Refresh menus are effective when accessing the SVP from HP StorageWorks P9000 Storage Remote Web Console?
If only the Exit and Refresh menus are effective when accessing the SVP from the Remote Web Console, the SVP might not be ready, or another user could be performing write processing. Wait a moment and then refresh the window.
What causes FCU errors when accessing an FCU parameter definition file in HP StorageWorks P9000 Storage on Windows?
If FCU reports errors when accessing an FCU parameter definition file on Windows systems, remove all space lines from the FCU parameter definition files. FCU versions 01-01-36 and later do not support space lines, while FCU versions 01-01-24 and earlier supported space lines when run without the GUI.
How to recover from HP StorageWorks P9000 Storage Initial Copy Failed error?
If the primary HP Storage system suspended a pair during the initial copy operation, indicating the data on the S-VOL isn't identical to the P-VOL (possibly due to an invalid track format), release the pair from the primary storage system. Clear all error conditions at the primary storage system, the P-VOL, the secondary storage system, and the S-VOL. Reformat failed tracks using ICKDSF, and restart the initial copy operation using the Add Pair dialog box.
What does MCU P/S-OFF mean in HP Storage?
If the primary HP Storage system suspended all Cnt Ac-J Z pairs because it was powered off, no action is needed. The primary system automatically restores these pairs when it's powered back on.
How to fix missing LUN mapping information in HP StorageWorks P9000 mapping reports?
Missing LUN mapping information in the mapping reports can occur if read permission has not been assigned on corresponding OS device special files. Assign read permission to device special files to resolve this.
How to troubleshoot HP StorageWorks P9000 Storage Communication Failed error?
If communication fails on your HP Storage, meaning the primary system connects to the secondary system but a logical communication timeout occurs, ensure that the secondary system port and network relay devices (cables, switches) are properly configured and functioning.
General| RAID Support | RAID 0, 1, 5, 6, 10 |
|---|---|
| Interface | Fibre Channel, iSCSI, FCoE |
| Form Factor | Rack-mountable |
| Model | P9000 |
| Operating System Compatibility | Windows, Linux, VMware, HP-UX |
| Host Interface | Fibre Channel, iSCSI, FCoE |
| Drive Interface | SAS, SSD |
| Drive Types Supported | SSD, SAS |
| Redundancy | Redundant controllers, power supplies, and fans |
| Management Software | HP StorageWorks Command View |
