What to do if line is longer than the maximum length in HP StorageWorks P9000 Storage?
If a line exceeds the maximum length in HP Storage, modify the definition statement to fit within 120 columns, and then re-execute the process.
What to do if HP Storage port number is invalid?
If the port number specified is invalid or the cable isn't connected to the specified port on your HP Storage, delete the failed path. Check the specified port number and the cable connection, then retry.
How to troubleshoot HP StorageWorks P9000 Storage Communication Failed error?
If communication fails on your HP Storage, meaning the primary system connects to the secondary system but a logical communication timeout occurs, ensure that the secondary system port and network relay devices (cables, switches) are properly configured and functioning.
How to troubleshoot DATASET_ERROR_DSORG_NOT_SUPPORTED in HP Storage?
To troubleshoot the DATASET_ERROR_DSORG_NOT_SUPPORTED error, check the DO type using the MF-File list command in the FCU Help menu or the VTOC dump data on the mainframe host.
What causes DATASET_ERROR_VOLUME_DEFINED_READ_ONLY in HP Storage?
If you encounter the DATASET_ERROR_VOLUME_DEFINED_READ_ONLY error, ensure that the target dataset for an open-system write operation is on a 3390-3A/C volume.
How to fix missing LUN mapping information in HP StorageWorks P9000 mapping reports?
Missing LUN mapping information in the mapping reports can occur if read permission has not been assigned on corresponding OS device special files. Assign read permission to device special files to resolve this.
What does path rejected mean on HP StorageWorks P9000?
If you encounter a 'Path Rejected' error (MCU/RCU) on your HP Storage, start by deleting the failed path. Additionally, delete all paths and secondary systems that are not currently in use. Remember that the primary system can connect to a maximum of four secondary systems, with up to eight paths to each system. Ensure that all primary and secondary system ports are properly configured: use ordinary RCU target ports for secondary systems and initiator ports for primary systems. If necessary, connect to the secondary system to delete paths, reconfigure the ports, then reconnect to the primary system and add the path or secondary system again using Edit Path or Add RCU.
How to recover from a HP StorageWorks P9000 hardware blockade?
If hardware redundancy has been lost due to some blockade condition, remove the hardware blockade or failure according to the SIM. Restore the failed volume pairs (Pairresync). If a failure occurs during execution of the RAID Manager horctakeover command, secondary volumes in SSWS pair status may remain in the master journal. If these volumes remain, execute the pairresync -swaps command on the secondary volumes whose pair status is SSWS. This operation changes all volumes in the master journal to primary volumes. After this operation, restore the volume pairs (Pairresync).
What to do if code to customize does not exist in the code conversion table in HP StorageWorks P9000 Storage?
If the code to customize does not exist in the code conversion table of your HP Storage, check the code to customize, and then re-execute the process.
What to do if HP Storage pair create operation resulted in a timeout error?
If a pair create or resync operation on your HP Storage results in a timeout error, and a SIM was generated due to a hardware failure, call HP Technical Support after the problem is solved, then retry Cnt Ac-J Z operations. If no SIM was generated, wait 5-6 minutes and check the pair status. If the status changed correctly, the operation completed after the timeout. If the status did not change, retry the operation during a lighter workload. If there is a communication error between the Remote Web Console and the SVP, consult the HP StorageWorks P9000 Remote Web Console User Guide.
General introduction to the Data Exchange Code Converter functionality and its purpose.
Describes the operational flow and components involved in the Data Exchange Code Converter.
Details the process of converting alphanumeric character data, focusing on single-byte codes.
Explains double-byte character conversion, including mixed single and double-byte data.
Covers the conversion of numeric data fields, including process flow.
Lists the necessary hardware, software, and release notes for the Code Converter.
Details the files and their locations provided on the installation media for UNIX.
Step-by-step guide for installing, uninstalling, and upgrading on UNIX systems.
Explains how to input the license key required for Code Converter operation.
Illustrates the user's workflow for performing data conversion operations.
Describes the supported record formats and field positions for data files.
Introduces MTO conversion, including EBCDIC to ASCII and IBM Traditional Chinese to Big5.
Details the specific conversion of alphanumeric fields in MTO.
Introduces OTM conversion, including ASCII to EBCDIC and Big5 to IBM Traditional Chinese.
Explains how to customize the code conversion table for OTM.
Details the conversion of packed decimal numeric data.
Explains the process for converting zoned decimal numeric data.
Provides a high-level overview of the code conversion table customization process.
Describes the syntax rules for defining conversion statements used in customization.
Explains the command syntax for customizing tables on UNIX systems.
Lists and explains common error codes and their meanings.
Details the format and interpretation of messages generated by the ccnv utility.
Provides guidance on what information to gather before contacting HP support.
Lists other relevant HP documents for further information.
Information on how to obtain technical support from HP.
General| RAID Support | RAID 0, 1, 5, 6, 10 |
|---|---|
| Interface | Fibre Channel, iSCSI, FCoE |
| Form Factor | Rack-mountable |
| Model | P9000 |
| Operating System Compatibility | Windows, Linux, VMware, HP-UX |
| Host Interface | Fibre Channel, iSCSI, FCoE |
| Drive Interface | SAS, SSD |
| Drive Types Supported | SSD, SAS |
| Redundancy | Redundant controllers, power supplies, and fans |
| Management Software | HP StorageWorks Command View |
To Next Page