What causes HP StorageWorks P9000 Storage initialization to fail?
If your HP Storage initialization fails, ensure that the primary and secondary systems are physically and correctly connected. Verify that you entered the correct remote system S/N, SSID, and path parameters, including port, link address, and logical address. Also, confirm that the Fibre Channel topology settings on the primary and secondary systems ports are correct.
What to do if HP Storage returns DATASET_ERROR_DATASET_NOT_FOUND?
If you encounter a DATASET_ERROR_DATASET_NOT_FOUND error, verify that the actual dataset name matches the specified dataset name. To check the dataset name, you can use the MF-File list command in the FCU Help menu or the VTOC dump data on the mainframe host.
How to troubleshoot HP StorageWorks P9000 Storage Communication Failed error?
If communication fails on your HP Storage, meaning the primary system connects to the secondary system but a logical communication timeout occurs, ensure that the secondary system port and network relay devices (cables, switches) are properly configured and functioning.
What to do if I/O error of the code conversion table occurred in HP Storage?
If you encounter an I/O error with the code conversion table in HP Storage, re-execute the process after ensuring the following: * The code conversion table to customize has a readable file attribute. * The code conversion table to customize exists. * A read-only table that has the same name as the output table exists in the same directory with an attribute. * The output directory of the table is read-only.
How to resolve HP Storage PSUE S-VOL failure?
To resolve a PSUE / S-VOL Failure error on HP Storage: * Check the path status on the RCU Status dialog box. If errors occurred on the path, clear the error conditions. * Clear any error conditions at the remote system or S-VOL, then resynchronize the pair from the primary system. * If you need to access the S-VOL to clear the error conditions, release the pair from the secondary system. After you clear the error conditions, re-create the pair.
What causes FCU errors when accessing an FCU parameter definition file in HP StorageWorks P9000 Storage on Windows?
If FCU reports errors when accessing an FCU parameter definition file on Windows systems, remove all space lines from the FCU parameter definition files. FCU versions 01-01-36 and later do not support space lines, while FCU versions 01-01-24 and earlier supported space lines when run without the GUI.
What causes DATASET_ERROR_VOLUME_DEFINED_READ_ONLY in HP Storage?
If you encounter the DATASET_ERROR_VOLUME_DEFINED_READ_ONLY error, ensure that the target dataset for an open-system write operation is on a 3390-3A/C volume.
What to do if there is a pinned track on a HP StorageWorks P9000 Business Copy volume?
Contact HP Technical Support for assistance in recovering pinned tracks.
How to recover from a HP StorageWorks P9000 hardware blockade?
If hardware redundancy has been lost due to some blockade condition, remove the hardware blockade or failure according to the SIM. Restore the failed volume pairs (Pairresync). If a failure occurs during execution of the RAID Manager horctakeover command, secondary volumes in SSWS pair status may remain in the master journal. If these volumes remain, execute the pairresync -swaps command on the secondary volumes whose pair status is SSWS. This operation changes all volumes in the master journal to primary volumes. After this operation, restore the volume pairs (Pairresync).
What to do if HP Storage pair create operation resulted in a timeout error?
If a pair create or resync operation on your HP Storage results in a timeout error, and a SIM was generated due to a hardware failure, call HP Technical Support after the problem is solved, then retry Cnt Ac-J Z operations. If no SIM was generated, wait 5-6 minutes and check the pair status. If the status changed correctly, the operation completed after the timeout. If the status did not change, retry the operation during a lighter workload. If there is a communication error between the Remote Web Console and the SVP, consult the HP StorageWorks P9000 Remote Web Console User Guide.
General introduction to the Data Exchange Code Converter functionality and its purpose.
Describes the operational flow and components involved in the Data Exchange Code Converter.
Details the process of converting alphanumeric character data, focusing on single-byte codes.
Explains double-byte character conversion, including mixed single and double-byte data.
Covers the conversion of numeric data fields, including process flow.
Lists the necessary hardware, software, and release notes for the Code Converter.
Details the files and their locations provided on the installation media for UNIX.
Step-by-step guide for installing, uninstalling, and upgrading on UNIX systems.
Explains how to input the license key required for Code Converter operation.
Illustrates the user's workflow for performing data conversion operations.
Describes the supported record formats and field positions for data files.
Introduces MTO conversion, including EBCDIC to ASCII and IBM Traditional Chinese to Big5.
Details the specific conversion of alphanumeric fields in MTO.
Introduces OTM conversion, including ASCII to EBCDIC and Big5 to IBM Traditional Chinese.
Explains how to customize the code conversion table for OTM.
Details the conversion of packed decimal numeric data.
Explains the process for converting zoned decimal numeric data.
Provides a high-level overview of the code conversion table customization process.
Describes the syntax rules for defining conversion statements used in customization.
Explains the command syntax for customizing tables on UNIX systems.
Lists and explains common error codes and their meanings.
Details the format and interpretation of messages generated by the ccnv utility.
Provides guidance on what information to gather before contacting HP support.
Lists other relevant HP documents for further information.
Information on how to obtain technical support from HP.
General| RAID Support | RAID 0, 1, 5, 6, 10 |
|---|---|
| Interface | Fibre Channel, iSCSI, FCoE |
| Form Factor | Rack-mountable |
| Model | P9000 |
| Operating System Compatibility | Windows, Linux, VMware, HP-UX |
| Host Interface | Fibre Channel, iSCSI, FCoE |
| Drive Interface | SAS, SSD |
| Drive Types Supported | SSD, SAS |
| Redundancy | Redundant controllers, power supplies, and fans |
| Management Software | HP StorageWorks Command View |
To Next Page