HP StorageWorks XP20000/XP24000 - Disk Array - Page 125

DescriptionItem
The port number, host group number, and LUN of the volume specified as a
secondary volume when the pair is created
S-VOL(Port-G-ID-LUN)
The serial number of the paired storage systemS/N
The LDKC number of the paired storage systemLDKC
The path group ID or SSID of the paired storage system. When the default value
is set to the path group ID, the output is Default.
ID
The controller ID of the paired storage systemController ID
The initial copy mode
Entire: Copy all, None: Do not copy
Initial Copy
The fence level (the condition that MCU rejects the write operation to the primary
volume)
Never: No condition, Data: S-VOL data, Status: S-VOL status
Fence Level
The initial copy speed (the number of tracks you can copy at a time)Copy Pace
The priority of the initial copy operation (scheduling order)Priority
The unit of the differential management
Auto, Cylinder, Track
Diff
The quorum disk ID used by the pair.Quorum Disk ID
The result of operation
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of created pairsNum. of Pairs
Pairresync Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[ESAM],Pairresync,,Normal end,,,Seq.=xxxxx
+{P-VOL(Port-G-ID-LUN),S-VOL(Port-G-ID-LUN),Fence Level,Copy Pace,Priority,Result}=
-{1A-0x00-0x000,1B-0x00-0x000,Never,15,256,Normal End},
{1A-0x00-0x001,1B-0x00-0x001,Never,15,256,Normal End},
(snip)
-(snip), Num. of Pairs=xx
[ESAM]
XP External Storage Access Manager function
Pairresync
Pairresync operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
XP24000/XP20000 Audit Log User and Reference Guide 125