Detailed Information
Detailed information displays for this operation, as shown in Table 88.
Table 88 CheckPaths(FIBRE) Operation
DescriptionItem
The port name of the external port of the local storage system.Port
The WWN of the Target port of the external storage system.WWN
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of mapping paths that path status has been checked.Num. of Paths
ChkPath-RestoreVol Operation
If this operation is performed from Remote Web Console, this logged information indicates that the
ChkPath-RestoreVol operation was only requested, but not finished. However, if this operation is
performed from CFL Extension (or if this logged information appears between the CflSet Start operation
and the CflSet End operation), this logged information indicates that the ChkPath-RestoreVol operation
was finished.
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Ext Stor],ChkPath-RestoreVol,,Normal end,Seq.=xxxxxx
+{Group,Result}=[{E1-1,Normal End},{E1-2,Error(605-3003)},{E1-3,Normal End},
{E1-4,Normal End}],Num. of Groups=XXX
[Ext Stor]
HP XP External Storage Software function
ChkPath-RestoreVol
ChkPath-Restore Vol operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 89.
Table 89 ChkPath-RestoreVol Operation
DescriptionItem
The group number of the external volume resumed.Group
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
XP External Storage Software Function134
To Next Page
Loading...
