HP StorageWorks XP20000/XP24000 - Disk Array - Page 144

ORM Value Operation
Example 1 (changing the threshold of FC/SATA)
user-name,xx,YYYY/MM/DD,HH:MM:SS.xx, 00:00,[Information],ORM Value,Alter,Normal end,,,Seq.=xxxxx
+Type=7days
+{Read Err.(Unrecovered),Read Err.(Recovered),Seek Err.(Recovered),Seek Err.
(Unrecovered),
Not Ready,Other Errors}={15,1.00e-008,100,10,10,10}
++PDEV=[HDDR00-01,HDDR00-02,(snip)],Num. of PDEVs=1152
Example 2 (changing the threshold of a solid state drive)
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,
00:00,[Information],ORM Value,Alter,Normal end,,,
Seq.=xxxxx
+Type=Total
+{Total Defect Count}={15}
++PDEV=[HDDR00-01,HDDR00-02,(snip)],Num. of PDEVs=1152
Example 3 (Error Reset)
user-name,xx,YYYY/MM/DD,HH:MM:SS.xx, 00:00,[Information],ORM Value,Error Reset,Normal end,,,Seq.=xxxxx
+PDEV=HDDR00-01
[Information]
Information function
ORM Value
ORM Value operation
Alter and Error Reset
Alter is the selected parameter for example 1 and Error Reset is the selected parameter for example
2. This operation uses the following parameters, as shown in Table 99.
Table 99 Parameters for ORM Value Operation
DescriptionParameter
Change the threshold of ORM (Online Read Margin).Alter
Indicates Error Reset.Error Reset
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Information Function144