HP StorageWorks XP20000/XP24000 - Disk Array - Page 191

Install function
Uninstall
Uninstall operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 158.
Table 158 Uninstall Operation (Uninstalling a DKA, an ECC Group or an LDEV)
DescriptionItem
The Disk Adapter (DKA) mounting location.Disk Adapter (DKA)
The type of Disk Adapter (DKA).Kind
The number of Disk Adapters (DKA).
Num. of Disk
Adapters (DKA)
The Disk Adapter (DKA) mounting location.Disk Unit (DKU)
The number of subsystems.
Num. of Disk Units
(DKU)
The mounting location of fibre switch.FSW
The number of fibre switches.Num. of FSWs
The parity group number.PG
The number of parity groups.Num. of PGs
The B4 number.B4
The spare drive number.SPARE
The number of spare drives.Num. of SPAREs
NOTE:
Only the changed items will be output. The Detailed information for the recovery process will not be
output when the uninstallation process is executed before the process has finished. However, the setting
of the recovery process will be output as the Detailed information for the process when the uninstallation
process is executed before the recovery process has not finished.
Example 3 (uninstalling a cache memory module)
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Uninstall,,Normal end,,,Seq.=xxxxx
+{CM,CMG,size,On-Demand}=[{Basic,2048,16384,0},{Option1,2048,16384,0},
{Option2,2048,16384,0},{Option3,2048,16384,0}],Num. of CMs=4
XP24000/XP20000 Audit Log User and Reference Guide 191