LUN Manager function
Change WWN
Change World Wide Name operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 174.
Table 174 Change WWN Operation
DescriptionItem
The name of the port where the host is connected.Port
The host group number on which the host with WWN or nickname of the host bus adapter
being changed is registered.
HostGrpID
Indicates WWN of the host bus adapter before change. WWN is represented in
hexadecimal.
WWN
Indicates WWN of the host bus adapter after change.Change WWN
The nickname of the host bus adapter after change.Change Nickname
The number of host bus adapters (WWN) where the settings have been changed.Num. of WWNs
Delete Disk Controller (DKC) World Wide Name (WWN)
Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[LUNM],Delete DKC WWN,,Normal end,,,Seq.=xxxxx
+{Port,Delete WWN}=[{XX,0xXXXXXXXXXXXXXXXX},{XX,0xXXXXXXXXXXXXXXXX}],Num. of =2
[LUNM]
LUN Manager function
Delete DKC WWN
Delete Disc Controller World Wide Name operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
LUN Manager (LUNM) Function204
To Next Page
Loading...
