HP StorageWorks XP20000/XP24000 - Disk Array - Page 211

Detailed information displays for this operation, as shown in Table 184.
Table 184 Set FCSP Port Switch Operation
DescriptionItem
The name of the port where authentication parameter has been set.Port
The setting status whether to execute authentication by port.
Disable: Do not authenticate, Enable: Authenticate
Switch
Not used. (fixed to 0)DH Group
The setting status of authentication method.
bi-directional: bi-directional authentication, unidirectional: unidirectional authentication
Auth
The user name of the port.UserName
The number of ports where authentication parameter has been set.Num. of Ports
Set Fibre-Channel Security Protocol (FCSP) Target Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[LUNM],Set FCSP Target,,Normal end,,,Seq.=xxxxx
+{Port,HostGrpID,Switch,DH Group,UserName}=[{1E,0x01,Enable,0,1111111111111111},
{3E,0x01,Disable,0,2222222222222222}],Num. of Grps=2
[LUNM]
LUN Manager function
Set FCSP Target
Set FCSP Target operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 185.
Table 185 Set FCSP Target Operation
DescriptionItem
The name of the port which includes the host group where authentication parameter has
been set.
Port
The number of the host group where authentication has been set.HostGrpID
The setting status whether to execute authentication by host group.
Disable: Do not authenticate, Enable: Authenticate
Switch
XP24000/XP20000 Audit Log User and Reference Guide 211