HP StorageWorks XP20000/XP24000 - Disk Array - Page 249

30 PORT Function
Change Port Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[PORT],Change Port,,Normal end,,,Seq.=xxxxx
+Attribute=RCU Target
++Port=[1E,3E,5E,7E], Num.of Ports=4
[PORT]
PORT function
Change Port
Change Port operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 226.
Table 226 Change Port Operation
DescriptionItem
The attribute of the port after change.
Target: Target port, Initiator: Initiator port,
RCU Target: RCU Target port, External: External port
Attribute
The name of the port where the setting is changed.Port
The number of ports where the setting is changed.Num. of Ports
XP24000/XP20000 Audit Log User and Reference Guide 249