HP StorageWorks XP20000/XP24000 - Disk Array - Page 268

Change Reserve Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[SI],Change Reserve,,Normal end,Seq.=xxxxx
+Attribute=Set
++{VOL(LDKC:CU:LDEV),Result}=[{0xZZ:0xXX:0xYY,Normal end},{0xZZ:0xXX:0xYY,
Error(xxxx-yyyy)}],Num.of Vols=2
[SI]
ShadowImage for Mainframe function (for the IBM z/OS)
Change Reserve
Change Reserve operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 243.
Table 243 Change Reserve Operation
DescriptionItem
Indicates whether the reserve attribute is set or cancelled
Set: the reserve attribute is set, Reset: the reserve attribute is cancelled
Attribute
The LDKC, CU, and LDEV numbers of the volume that the reserve attribute is set or
cancelled
VOL(LDKC:CU:LDEV)
The result of operation
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of volumes that the reserve attribute is set or cancelledNum. of Vols
Consistency Group (CTG) Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[SI],CTG,,Normal end,,,Seq.=xxxxx
+{CTG,Command,Result}=[{0x00,,Normal end},{0x01,,Error(xxxx,yyyy)}],Num. of CTGs=2
[SI]
ShadowImage for Mainframe function (for the IBM z/OS)
CTG
Consistency Group operation
Normal end
The operation has ended normally.
ShadowImage (SI) for Mainframe Function268