HP StorageWorks XP20000/XP24000 - Disk Array - Page 271

Detailed information displays for this operation, as shown in Table 246.
Table 246 Option Operation
DescriptionItem
Indicates whether the Swap & Freeze option is enabled or disabled.
Enable: Option is enabled, Disable: Option is disabled.
Swap & Freeze
Indicates whether the host I/O option is enabled or disabled.
Enable: Option is enabled, Disable: Option is disabled.
HOST I/O
Performance
Indicates whether the FCv2 Slower Copy1 option is enabled or disabled.
Enable: Option is enabled, Disable: Option is disabled.
FCv2 Slower
Copy1
Indicates whether the FCv2 Slower Copy2 option is enabled or disabled.
Enable: Option is enabled, Disable: Option is disabled.
FCv2 Slower
Copy2
Reserved items. X is a number from 05 to 32.Reserve X
Indicates whether the OFFLINE DATA MIGRATION option is enabled or disabled.
Enable : Option is enabled, Disable Option is disabled.
This item may be displayed instead of Reserve 32.
OFFLINE DATA
MIGRATION
Resync Pair Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[SI],Resync Pair,,Normal end,,,Seq.=xxxxx
+Copy pace=Faster,Resync Type=Normal Copy
++{S-VOL(LDKC:CU:LDEV),T-VOL(LDKC:CU:LDEV),Result}=[{0xXX:0xAA:0xBB,0xYY:0xCC:0xDD,
Normal end},{0xXX:0xAA:0xBB,0xYY:0xCC:0xDD,Error(xxxx-yyyy)}],Num. of Pairs=2
[SI]
ShadowImage for Mainframe function (for the IBM z/OS)
Resync Pair
Resync Pair operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 247.
Table 247 Resync Pair Operation
DescriptionItem
The set copy speed
Faster: High speed, Medium: Medium speed, Slower: Low speed
Copy Pace
XP24000/XP20000 Audit Log User and Reference Guide 271