DescriptionItem
Indicates whether the setting to copy the CFW data to the remote volume is enabled
or not
Only M-VOL: Copy to main volume only is enabled
Copy To R-VOL: Copy to main and remote volume is enabled
CFW
The error level changed (handling if trouble occurs)
This value is output when the pair option of the asynchronous pair is changed only
Volume: Volume (appropriate volume only is suspended)
Group: Group (suspended by consistency group)
Error Level
The result of operation
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
Result
The number of changed pairsNum. of Pairs
Clear SIM Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[TC],Clear SIM,,Normal end,,,Seq.=xxxxxx
[TC]
TrueCopy for Mainframe function (for IBM z/OS)
Clear SIM
Clear Service Information Message (SIM) operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Delete Cmd.Dev Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[TC z/OS(R)], Delete Cmd.Dev,,
Normal end,,,Seq.=xxxxx
[TC]
TrueCopy for Mainframe function (for IBM z/OS)
Delete Cmd.Dev
Delete Command Device operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
XP24000/XP20000 Audit Log User and Reference Guide 285
To Next Page
