Detailed information displays for this operation, as shown in Table 260.
Table 260 Function Switch Operation
DescriptionItem
Each bit position (on/off) of the function switch information assigned by 64 bits. The
beginning of the string is bit 0 and the ending of it is bit 63. "0" indicates the bit is off,
and "1" indicates the bit is on.
In the example above, bit 3 and bit 5 are on and the other bits are off.
Switch
Resume Pair Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[TC],Resume Pair,,Normal end,,,Seq.=xxxxxx
+{M-VOL(LDKC:CU:LDEV),R-VOL(LDEV),Fence Level,Copy Pace,Priority,TS,Range,Error Level,
Result}=
-{0x00:0x00:0x00,0xFE,Never,15,256,-,Group,Group,Normal End},
{0x00:0x00:0x01,0xFF,Never,15,256,-,Group,Group,Normal End},(snip)
-(snip), Num. of Pairs=xx
[TC]
TrueCopy for Mainframe function (for IBM z/OS)
Resume Pair
Resume Pair operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 261.
Table 261 Resume Pair Operation
DescriptionItem
The LDKC, CU, and LDEV numbers of the main volume in the restored pair
M-VOL
(LDKC:CU:LDEV)
The LDEV number of the remote volume in the restored pairR-VOL (LDEV)
The fence level set (the condition that MCU rejects the write operation to the primary
volume)
Never: No condition, Data: S-VOL data, Status: S-VOL status
Fence Level
The initial copy speed set (the number of tracks you can copy at a time by restoring)Copy Pace
The priority of the restoring operation set (scheduling order)Priority
TrueCopy (TC) for Mainframe Function288
To Next Page
