DescriptionItem
The capacity of the created V-VOLs indicated by blocksLDEVCapa(blocks)
The SSIDSSID
The number of V-VOLs createdNum. of LDEVs
The number of V-VOL groups createdNum. of Group
Asso V-VOL/Rel Pool Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[VVOL], Asso V-VOL/Rel Pool,,Normal end,Seq.=xxxxx
+{Command,LDKC:CU:LDEV,Pool ID,Warn Threshold(%)}=[{Associate,0x00:0x00:0x00,0,80},
{Associate,0x00:0x00:0x01,0,80},{Associate,0x00:0x00:0x02,0,80}],Num. of VOLs = 3
[VVOL]
V Volume function
Asso V-VOL/Rel Pool
Associate V-VOL/Release Pool operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 301.
Table 301 Asso V-VOL/Rel Pool Operation
DescriptionItem
Indicates the operation executed to the XP Thin Provisioning (THP) volume. If Command
is Release or Discard, the logged information indicates that the operation was only
requested, but not finished .
Associate: Links the Pool and the THP volume.
Release: Releases the link between the Pool and the THP volume.
Change: Changes the warn threshold.
Discard: Discards the 0 data pages.
Stop Discarding: Suspends the discarding of the 0 data pages.
Command
The LDKC number, CU number and the LDEV number of the THP volume.LDKC:CU:LDEV
The pool ID of the connected pool, released pool, or the pool where the warn threshold
was changed.
This value is output only when linking the Pool and the THP volume.
Pool ID
XP24000/XP20000 Audit Log User and Reference Guide 329
To Next Page
