HP StorageWorks XP20000/XP24000 - Disk Array - Page 335

[VVOL]
V Volume function
Set Pool
Set Pool operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 308.
Table 308 Set Pool Operation
DescriptionItem
The pool ID of the created pool.Pool ID
The pool type. 1 is always output.
1: HP XP Snapshot, 2: HP XP Thin Provisioning Software
Pool Type
The threshold of the usage rate of the created pool.
The unit is percent (%).
Threshold (%)
The result of pool creation.
Normal end: Normal end, Error(xxxx-yyyy): Abnormal end, Not Execute: Not Executed
xxxx: Part code, yyyy: Error code
Pool Result
The number of the created pool.Num of Pool
The LDKC number, the CU number and the LDEV number of the pool volume.LDKC:CU:LDEV
The result of the pool volume creation.
Normal end: Normal end, Error(xxxx-yyyy): Abnormal end, Not Execute: Not Executed
xxxx: Part code, yyyy: Error code
LDEV Result
The number of the created pool volume.Num. of LDEVs
Set XRC Option Operation
root,99,2004/12/02,17:51:17.468,+09:00,[XRC],Set XRC Option,,Normal End,,,Seq.=00020
+{CLPR,LV2THD(%),Block Option,Donot Block,LV1 Sleep,SleepTime(ms),LV1 SIM,LV2 Suspend}
=[{00,50,Cache,Disable,Disable,100,Disable,Disable},
-{01,70,Cache,Enable ,Disable,10,Disable,Disable},
-{02,60,Cache,Disable,Disable, 10,Enable ,Enable }],Num. of CLPRs=32
[XRC]
XRC function
Set XRC Option
XP24000/XP20000 Audit Log User and Reference Guide 335