ExplanationItemNo.
The SLPR number. For storage administrators or commands from
the host, the number 99 appears.
Not output when the operation name is AuditLog and the event
name is Create File.
SLPR number2
Year, month, and day the audit log was created (YYYYMMDD).
Date
1
3
Hour, minute, second and millisecond the audit log was created
(HH:MM:SS.xxx).
Time
1
4
The time difference between Universal Time (UT) and the local
time appears as HH:MM (HH: hour, MM: minute).
Time zone5
The abbreviation indicating the function or option which has been
used to perform the setting operation is output. See Table
6 on page 41 for the relationship between the abbreviation output
and the actual function.
This information is not output when commands are received from
the host.
Function name
2
6
The operation, event, or interface name.
See Table 6 on page 41 for a list of functions and how they relate
to operations or options. See Appendix A on page 345 for the
relationship between GUI operation and the operation name output
to audit log information files for each option. See Appendix
B on page 363 for the relationship between operation of SVP and
the operation name output to audit log information files.
Operation, event, or interface
name
3
7
Parameters for certain functions, such as Modify for the
ChangeMode operation.
For some operations, such as Paircreate, parameters display as
detailed information on the following line or lines. These detailed
parameters include an Index and the Values you set (see Figure
4).
Parameters8
Audit Log File Format34
To Next Page
Loading...
