Encryption (ENC) Function — Enc. Key Restore Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[ENC],Enc. Key Restore,,Normal end,,,Seq.=xxxxx
[ENC]
ENC function
Enc. Key Restore
Encryption Key Restore operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Log information serial number (0000000000 to 4294967295)
Encryption (ENC) Function — PG Enc. Set Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[ENC],PG Enc. Set,,Normal end,,,Seq.=xxxxx
+{PG,Encryption}=[{XX-XX,Enable},{XX-XX,Disable}],Num. of PGs=2
[ENC]
ENC function
PG Enc. Set
PG Encryption Set operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Log information serial number (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 310.
Table 310 PG Enc. Set Operation
DescriptionItem
The parity group number.PG
The status of the encryption.
Enable: The encryption setting is enabled.
Disable: The encryption setting is disabled.
Encryption
The number of parity groups.Num. of PGs
Audit Log Information about the Key Used for the Encryption License Key340