HP StorageWorks XP20000/XP24000 - Disk Array - Page 55

5 Account Function
Set User Account Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[Account],Set User Account,,Normal end,,,Seq=xxxxx
+Operation=Change
+{UserID,Authority,SLPRNo,WritePermission,ReadPermission,AccountFlag}=
-[{use001,Administrator,65535,FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
FFFFFFFFFF
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF,-,Enable},
-{use002,User,1,-,-,Disable}]Num. of Users=2
[Account]
Account function
Set User Account
Set User Account operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in Table 11.
Table 11 Set User Account Operation
DescriptionItem
The setting operation of the user account.
Add: add user account. Change: change, Delete: delete. PassChg: change password
Operation
The user ID.UserID
The authority of the user. A dash (-) appears when nothing is changed.
Administrator (Modification authority of account administrator roll): Administrative right.
User: users right
Authority
The SLPR number of the user. A dash (-) appears when nothing is changed.
65535: Storage administrator. 1 to 31: Storage partition administrator
SLPRNo
The write permission for each function appears as a hexadecimal character string. If a
hexadecimal number is indicated for the binary number, a bit position will describe the
relationship between each function and its write permissions. (see Table 12). A dash (-)
appears when nothing is changed.
WritePermission
XP24000/XP20000 Audit Log User and Reference Guide 55