HP StoreEver Series

Internal Components
SAS Version
Figure 7 3U rack-mount enclosure internal components (SAS)
2. SAS interface (2)1. Fan assembly
4. Power connector (use with LTO-2, LTO-3 and LTO-4 tape
drives)
3. Power supply
6. SAS cable and data connector (example shows SAS
cable with power)
5. Power switch and LED cables
8. Power switch assembly7. Power connector on SAS cable (use with LTO-5, LTO-6,
and all DAT tape drives)
9. Drive trays (2)
8 Introduction