To Next PageTo Next Page
Need help?Do you have a question about the HP StoreOnce 2700 and is the answer not in the manual?
General| Model | HP StoreOnce 2700 |
|---|---|
| Category | Network Hardware |
| Raw Capacity | 12 TB |
| Usable Capacity | Up to 8 TB |
| Data Deduplication | Yes |
| Form Factor | 2U |
| Replication | Yes |
| Maximum Number of Concurrent Backup Streams | 32 |
| RAID level | RAID 6 |
| Memory | 16 GB |
| Network Interfaces | 2 x 1 GbE |
| Protocols | CIFS, NFS, VTL |
| Processor | Intel Xeon |
| Power Supply | Dual redundant power supplies |
Describes the HP StoreOnce Backup system and its capabilities for backing up network servers.
Details the HP StoreOnce G3 Backup system family and its models.
Instructions for installing the rail kits for mounting the HP StoreOnce Backup system in a rack.
Guidance on physically mounting the system in a rack, including safety precautions.
Steps for connecting power and network cables to the HP StoreOnce Backup system.
Instructions for connecting expansion shelves to the 4500 and 4700 models.
Procedure for adding disks to expand storage capacity on the StoreOnce 2900.
Steps to power on the HP StoreOnce Backup system and its expected boot sequence.
How to make the StoreOnce Backup system visible and accessible on the network.
Methods for accessing the system's management interface via CLI or GUI.
Recommendations for creating and managing strong passwords for system security.
Using the system set config wizard for initial setup, including network and license configuration.
Steps involved in configuring network settings using the system set config wizard.
Procedure for configuring licenses for features like capacity expansion and security.
Fundamental concepts of network configuration for HP StoreOnce Backup systems.
Key elements of network setup: DNS servers, Port Sets, and Subnets.
Explanation of supported network port bonding modes for performance and resiliency.
Step-by-step guide to configuring network settings using the StoreOnce CLI wizard.
Procedures for adding or modifying existing network configurations via CLI.
Steps to create a new network configuration using the StoreOnce GUI.
How to modify existing custom network configurations via the StoreOnce GUI.
Details on licensing requirements and procedures for HP StoreOnce hardware.
Steps to discover and add storage for expansion shelves.
Procedure for updating StoreOnce software and firmware components.
Steps to configure remote support for accessing HP support.
Instructions for connecting the HP StoreOnce Backup system to a Fibre Channel network.
Steps to create a Virtual Tape Library (VTL) using Fibre Channel ports.
Explanation of SAN zoning concepts for Fibre Channel environments.
Setting up media servers to utilize StoreOnce Catalyst functionality.
Enabling data in flight encryption on Windows media servers for secure data transfer.
Guide to setting up the iSCSI Initiator for Virtual Tape Library devices.
Description of LEDs on the front panel of the HP StoreOnce 4700 Backup system.
Description of LEDs on the front panel of the HP StoreOnce 4500 Backup system.
Description of LEDs on the front panel of the HP StoreOnce 2900 Backup system.
Description of LEDs on the front panel of the HP StoreOnce 2700 Backup system.
Explanation of the LEDs associated with hot-plug drives in server units.
Description of the LEDs for the 1 Gbit ethernet ports.
Steps to troubleshoot issues related to network connectivity.
Guidance on diagnosing and resolving performance issues with the backup system.
Troubleshooting common issues related to powering the system on and off.
Steps to resolve issues related to product licensing.
Networking example demonstrating two subnets on different interfaces with static IP addresses.
Networking example showing two subnets on the same interface with static IPv4 and IPv6 addresses.
Networking example with two subnets on different interfaces, including VLAN tagging.
List of related HP documents and resources for the StoreOnce Backup system.
Explanation of document conventions, symbols, and text formatting used in the manual.
Information on HP's Customer Self Repair (CSR) program for StorageWorks products.
Instructions for registering the installed HP StoreOnce Backup system.
Recommendation and steps for enabling HP Insight Remote Support for enhanced service.
Contact information for submitting feedback and suggestions on product documentation.
Information regarding regulatory compliance markings for Belarus, Kazakhstan, and Russia.
