Need help?Do you have a question about the HP HPE Edgeline EL1000 and is the answer not in the manual?
General| Product Name | HP HPE Edgeline EL1000 |
|---|---|
| Category | Network Hardware |
| Product Type | Converged Edge System |
| Processor | Intel Xeon D |
| Networking | Multiple Gigabit Ethernet ports, optional 10GbE |
| Power Supply | Redundant power supply options |
| Operating System Support | Linux, Windows |
| Operating Temperature | 0°C to 40°C |
| Connectivity | USB, Serial |
| Expansion Slots | PCIe slots for expansion cards |
Identifies and describes the components located on the front panel of the system.
Details the status indicators and controls on the front of the system.
Lists and describes the hardware components found on the right side of the system.
Identifies key components located on the system board.
Covers the configuration details for PXI and PXIe interfaces.
Maps mini-PCIe module ports to cable colors and antenna connectors.
Explains the function and settings of the DIP switch.
Defines the status indicated by LEDs on hot-plug drives.
Identifies the ports on the HPE H240 Smart Host Bus Adapter.
Provides step-by-step instructions for installing an AC power supply.
Details the procedure for installing a DC power supply.
Describes methods for safely powering down the system.
Explains the procedures for powering up the system.
Lists available kits and methods for mounting the system.
Outlines procedures for removing the system from various mounts.
Details the process of removing the system's access panel.
Provides instructions for installing system fans.
Describes the procedure for installing a system blade.
Outlines the steps to remove a system blade.
Instructions for installing the mini-PCIe adapter board.
Explains how to install wireless antennas for the system.
Information on available optional services for the system.
Guidelines for selecting an optimal environment for system installation.
Specifies the operational temperature ranges for the system.
Details the electrical power requirements for the system.
Instructions on how to register the product for support.
Steps to install the wall mounting kit for the system.
Instructions for installing rack mounting kits (19-inch and 23-inch).
Procedures for installing the ETSI rack mounting kit.
Guidance on installing the Enterprise rack mounting kit.
Steps for installing a storage drive into the system.
General instructions for installing various card options.
Detailed steps for installing a PCIe card.
Instructions for installing a PXI/PXIe card.
Information on installing mini-PCIe modules.
Steps for installing a half-length mini-PCIe WiFi module.
Guidance for installing a full-length mini-PCIe LTE module.
Procedure for installing an NVMe M.2 SSD.
How to access the system's built-in configuration utilities.
Methods to identify the IP address of the iLO on system blades.
Configuring a static IP address via the serial console.
How to view or change DHCP settings via serial console.
Locating the IP address assigned via DHCP.
Links to detailed product specifications, features, and compatibility.
Lists supported OS and necessary drivers for the system.
Overview of HPE Integrated Lights-Out for server management.
Details on the HPE Active Health System for monitoring and diagnostics.
Information on using RESTful APIs for iLO management.
Describes the Integrated Management Log (IML) for system events.
Information displayed for Intelligent Power Distribution Units.
Details on Smart Storage Energy Packs supported by the system.
How to view chassis details using iLO 5.
Displays general and specific chassis details.
Information on the configured chassis date and time.
Steps to set or update the chassis time.
Overview of the firmware solution for Edgeline Systems.
Lists supported firmware types for the system.
Information on the management software for Edgeline systems.
Overview of the system's embedded UEFI System Utilities.
Information on procedures for resolving common system problems.
Lists the technical specifications of the system battery.
Provides instructions for replacing the system battery.
Links to view warranty details for different HPE product lines.
Information regarding safety, compliance, and chemical substances.
Precautions to avoid damaging system components with static electricity.
Describes various methods for proper grounding to prevent ESD.
Links to detailed product specifications, features, and compatibility.
Details on operating temperature and humidity ranges.
Provides the physical dimensions and weight of the system.
Technical details for the 500W and 800W power supplies.
General specifications for PXI and PXIe interfaces.
Lists normative standards for EMC compliance testing.
Technical specifications for system synchronization clocks.
Lists various HPE websites for support and information.
Guidance on how to contact HPE support and information to collect.
Information on how to download and subscribe to software updates and alerts.
Details on HPE's Customer Self Repair program.
Information on available remote support services from HPE.
To Next Page
