HP HPE Edgeline EL1000

Acoustic emission specificationsAcoustic emission specifications
Acoustic noiseAcoustic noise
Acoustic noise specifications for the following base configurations are available.
Table 11: Base configuration 1 (m510)Table 11: Base configuration 1 (m510)
ComponentComponent QuantityQuantity SpecificationSpecification
Blade 1 m510
DIMMs/cartridge 4 Any
SATA M.2/cartridge 1 64 GB
NVME M.2/cartridge 0 NA
PXI 4 PXI 6341
PSU 2 800 W AC
Table 12: Base configuration 2 (m710x and m710x-L)Table 12: Base configuration 2 (m710x and m710x-L)
ComponentComponent QuantityQuantity SpecificationSpecification
Blade 1 m710x and m710x-L
DIMMs/cartridge 4 Any
SATA M.2/cartridge 1 64 GB
NVME M.2/cartridge 0 NA
PXI 4 PXI 6341
PSU 2 800 W AC
Table 13: Base configuration 3 (m750)Table 13: Base configuration 3 (m750)
ComponentComponent QuantityQuantity SpecificationSpecification
Blade 1 m750
DIMMs/cartridge 4 Any
SATA M.2/cartridge 1 64 GB
NVME M.2/cartridge 0 NA
PXI 4 PXI 6341
PSU 2 800 W AC
The LWAd and LpAm when the system is operating in a 23°C ambient environment are provided in the following tables. Noise emissions
were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109).
Table 14: Acoustic noise when Table 14: Acoustic noise when systemsystem is idle is idle
systemsystem configuration configuration LWAd (B)LWAd (B) LpAm (dBA)LpAm (dBA)
Base 1 8 64.6
Base 2 8 64.6
Base 3 8 30.6
Acoustic emission specifications 152