HP HPE Edgeline EL1000 User Manual

Table of contentsTable of contents
1 Component identification
1.1 PCIe configuration
1.1.1 Front panel components
1.1.2 Front panel LEDs and buttons
1.1.3 Right side components
1.1.4 System board components
1.2 PXI/PXIe configuration
1.2.1 Front panel components
1.2.2 Front panel LEDs and buttons
1.2.3 Right side components
1.2.3.1 Mini-PCIe module port-cable mapping
1.2.4 System board components
1.2.4.1 DIP switch
1.3 Hot-plug drive LED definitions
1.4 HPE H240 Smart Host Bus Adapter port identification
2 Operations
2.1 Install an AC power supply
2.2 Install the DC power supply
2.3 Power down the system
2.4 Power up the system
2.5 Mount the system
2.6 Dismount the system
2.6.1 Dismounting the system from a wall mount
2.6.2 Dismounting the system from a rack mount
2.6.3 Dismounting the system from an ETSI rack mount
2.6.4 Dismounting the system from an Enterprise rack mount
2.7 Remove the access panel
2.8 Install the fans
2.9 Install the blade
2.10 Remove the blade
2.11 Install the mini-PCIe adapter board
2.12 Install the antenna
2.12.1 Installing the WiFi or LTE antennas
2.12.2 Installing the WiFi and LTE combo antennas
3 Setup
3.1 Optional services
3.2 Optimum environment
3.2.1 Temperature requirements
3.2.2 Power requirements
3.3 Installing hardware options
3.4 Registering the product
4 Hardware options installation

HP HPE Edgeline EL1000 Specifications

General

Brand	HP
Model	HPE Edgeline EL1000
Category	Network Hardware
Language	English