HP HPE Edgeline EL1000 User Manual

4.1 Installing the wall mounting option kit
4.2 Installing the rack mounting option kit
4.3 Installing the ETSI rack mounting option kit
4.4 Installing the Enterprise rack mounting option kit
4.5 Installing the drive
4.6 Installing the card options
4.6.1 Install the PCIe card
4.6.2 Install the PXI/PXIe card
4.7 Installing the mini-PCIe module options
4.7.1 Install a half-length mini-PCIe WiFi module option
4.7.2 Installing a full-length mini-PCIe LTE module
4.8 Installing the NVMe M.2 SSD option
5 Configuration
5.1 Accessing the System Utilities menu
5.2 Finding the IP address for an iLO on system blades
5.2.1 Using dynamic DNS to access the iLO
5.2.2 Using the MAC address to identify the IP address of the iLO
5.2.3 Using NMAP to identify the IP address of the iLO
5.2.4 Configuring the DHCP server for Windows on your laptop
5.2.5 Setting the static IP address using the serial console cable
5.2.5.1 Using iLO 4 configuration utility
5.2.5.2 Using iLO 5 configuration utility
5.3 Viewing or updating the DHCP address using the serial console cable
5.4 Finding the IP address through DHCP
6 Software and configuration utilities
6.1 Product QuickSpecs
6.2 Supported operating systems and drivers matrix
6.3 HPE iLO
6.3.1 Active Health System
6.3.1.1 Active Health System data collection
6.3.1.2 Active Health System log
6.3.2 iLO 4 or iLO 5 RESTful API support
6.3.3 Integrated Management Log
6.3.4 Temperature information
6.3.5 Thermal configuration settings
6.3.6 Intelligent PDU details
6.3.7 Smart Storage Energy Pack list
6.3.8 Using iLO 5 for viewing chassis information
6.3.8.1 Chassis information
6.3.8.2 Chassis Time
6.3.8.3 Configuring the chassis time
6.4 HPE Edgeline Component Pack
6.5 Firmware information

HP HPE Edgeline EL1000 Specifications

General

Brand	HP
Model	HPE Edgeline EL1000
Category	Network Hardware
Language	English