HP StoreOnce 4500 User Manual

HP StoreOnce
2700, 2900, 4500 and 4700 Backup
Installation and Configuration Guide
Abstract
This document describes how to install and configure HP StoreOnce 4700, 4500, 2900 and 2700 Backup systems. These
systems are also sometimes referred to as single-node StoreOnce products and they were introduced with StoreOnce software
version 3.9.0 (or 3.12.0 for HP StoreOnce 2900).
HP Part Number: BB877-90938
Published: August 2015
Edition: 5

HP StoreOnce 4500 Specifications

General

Model	HP StoreOnce 4500
Category	Network Hardware
Replication	Yes
Protocols	CIFS, NFS, VTL, OST
Deduplication Ratio	20:1
Operating System	HP StoreOnce OS
Network Interface	4 x 1GbE
Power Supply	Dual
Weight	Approx. 40 kg
Processor	Dual
Warranty	3 years

Summary

Installation and Cabling Procedures

Mounting the System in the Rack

Covers rail kit installation and system mounting procedures.

Connecting Hardware and Ports

Details connecting power, network, FC ports, and hardware components.

System Power-On and Management

Powering On the System

Instructions for powering on expansion shelves and the main backup system.

Accessing the Management Console

Covers discovering the system and accessing its management interface.

System Configuration

Using the System Set Config Wizard

Guides through configuring network, time, licenses, and hardware health.

Network Configuration Details

CLI Network Configuration

Covers identifying ports, bonding, using the net set wizard, and encryption.

GUI Network Configuration

Fibre Channel and Backup Server Configuration

Configuring Backup Servers