Intelligent PDU detailsIntelligent PDU details
The Intelligent Power Distribution Units section is displayed only if the chassis power supplies are connected to an iPDU.
After iLO is reset, or when an iPDU is attached, it takes approximately 2 minutes for the iLO web interface to display the Intelligent
Power Distribution Units table. This delay is due to the iPDU discovery process.
The following information is displayed in the table:
ID—The power supply bay number.
Part Number—The iPDU part number.
Serial Number—The iPDU serial number.
IP Address—The iPDU IP address.
SSL Port—The iPDU SSL port.
MAC Address—The MAC address of the iPDU network port. This value helps you to identify each connected iPDU because each iPDU
has a unique MAC address.
To Next Page
Loading...
Need help?
General
