To Next Page

To Previous Page

2. Lift the mid-frame cover (2) from the battery area.

Reverse this procedure to install the mid-frame cover.

Battery

Description Spare part number

Battery, 3000 mAh, USB-charging (includes cable) 795065-001

Before removing the battery, follow these steps:

1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and

then shut it down through the operating system.

2. Disconnect the power from the tablet by unplugging the power adapter cord from the tablet.

3. Disconnect all external devices from the tablet.

4. Remove the back cover (see Back cover on page 13).

WARNING! To reduce potential safety issues, use only the battery provided with the tablet, a replacement

battery provided by HP, or a compatible battery purchased from HP.

CAUTION: Removing a battery that is the sole power source for the tablet can cause loss of information. To

prevent loss of information, save your work or shut down the tablet through Windows before disconnecting

and removing the battery.

Remove the battery:

Battery 15

Questions and Answers:

Need help?

Do you have a question about the HP Stream 7 and is the answer not in the manual?

HP Stream 7 Specifications

General