HP T1000 G3 User Manual

HP T750 G2, HP T750J, HP T1000 G3, HP T1000J, HP T1500 G3, and HP T1500J UPS Models User Guide S 505922-002
1
Chapter 1 Introduction
The HP T750 G2, HP T750J, HP T1000 G3, HP T1000J, HP T1500 G3, and
HP T1500J Uninterruptible Power System (UPS) models protect your sensitive electronic
equipment from basic power problems such as power failures, power sags, power
surges, brownouts, and line noise.
Power outages can occur when you least expect them, and power quality can be
erratic. These power problems have the potential to corrupt critical data, destroy
unsaved work sessions, and damage hardware — causing hours of lost productivity
and expensive repairs.
With the HP T750 G2, HP T750J, HP T1000 G3, HP T1000J, HP T1500 G3, and
HP T1500J, you can safely eliminate the effects of power disturbances and guard the
integrity of your equipment. The UPS's flexibility to handle an array of network devices
makes it the perfect choice to protect your LANs, servers, workstations, and other
electrical equipment.
Figure 1 shows the HP T750 G2 UPS.
Figure 1 HP T750 G2 UPS

HP T1000 G3 Specifications

General

Topology	Line Interactive
Input Voltage	120V
Output Voltage	120V
Interface	USB
Form Factor	Tower
Output Connections	6 x NEMA 5-15R
Input Connection	NEMA 5-15P
Typical Backup Time at Half Load	10 minutes
Typical Backup Time at Full Load	3 minutes
Efficiency at Full Load	95%
Typical Recharge Time	8 hours
Efficiency	95%
Operating Temperature	0°C to 40°C
Storage Temperature	-15°C to 45°C
Humidity	0-95% non-condensing
Capacity	1000 VA
Battery Type	Sealed Lead Acid
Frequency	50/60Hz
Transfer Time	4-8 ms
Warranty	3-year limited warranty