To Next PageTo Next Page
Need help?Do you have a question about the HP R/T3000 G2 and is the answer not in the manual?
General| Power Rating | 3000VA/2700W |
|---|---|
| Rack Size | 2U |
| Frequency | 50/60 Hz |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -15°C to 45°C |
| Form Factor | Rack-mountable/Tower |
| Battery Type | Sealed lead-acid (SLA) |
| Battery Recharge Time | 3 hours |
| Transfer Time | 4-6 ms |
| Humidity | 0-95% non-condensing |
| Communication Interface | USB, Serial |
| Warranty | 3 years |
Important safety warnings and instructions to follow before installation.
Lists the necessary tools and hardware required for installation.
Guidelines for choosing an appropriate and safe location for the UPS.
Step-by-step instructions for mounting the UPS unit into a standard equipment rack.
Procedure for safely connecting the battery cables to the UPS unit.
Steps to connect the UPS to the main AC power source.
Procedure for installing the Extended Runtime Module (ERM) into a rack.
Guide for converting the UPS from rack-mount to a standalone tower configuration.
Overview of the battery replacement process and safety information.
Detailed steps for replacing the UPS battery modules.
Diagnostic guide using LED indicators to identify UPS issues.
Steps to resolve problems when the UPS is in Auto-Bypass mode.
Troubleshooting steps for when the UPS enters Converter Off mode.
Actions to take when a general alarm condition is indicated.
Steps to diagnose and resolve battery-related problems.
Procedure to address situations where the UPS is overloaded.
Troubleshooting steps if the UPS fails to power on.
