HP UPS R/T3000 ERM
Installation Instructions
Overview
The ERM consists of two battery packs in a 2U chassis. The ERM
connects directly to a UPS R/T3000 or to another ERM. Up to two
ERM units can be connected.
At the HP recommended 80 percent load, one ERM extends the
available UPS runtime up to 30 minutes.
For more information about any of the topics covered in this
document, see the UPS user guide located on the documentation CD
or HP website (http://www.hp.com/go/rackandpower
).
Precautions
WARNING: A risk of personal injury from electric shock
and hazardous energy levels exists. The installation of
options and routine maintenance and service of this
product must be performed by individuals who are
knowledgeable about the procedures, precautions, and
hazards associated with AC power products.
45 kg
100 lb
This symbol indicates that the ERM exceeds the
recommended weight for one individual to handle
safely.
WARNING: To reduce the risk of personal injury
or damage to the equipment, observe local
occupational health and safety requirements and
guidelines for manual material handling.
CAUTION: Always plan the rack installation so that the
heaviest item is on the bottom of the rack. Install the
heaviest item first, and continue to populate the rack from
the bottom to the top.
© Copyright 2009 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The only
warranties for HP products and services are set forth in the express warranty
statements accompanying such products and services. Nothing herein should
be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
Part Number 507935-001
anuary 2009 (First Edition)
Printed in China
To Next Page
Need help?
General
