HP UPS R5500 ERM - User Manual

HP UPS R5500 ERM
Installation Instructions
June 2006 (Third Edition)
Part Number 351641-003
Overview
The ERM consists of two battery packs in a 3U chassis. The
ERM connects directly to a UPS R5500 or to another ERM. Up
to two ERM units can be connected.
At the HP recommended 80 percent load, one ERM extends
the available UPS runtime up to 30 minutes.
For more information about any of the topics covered in this
document, see the UPS user guide located on the
documentation CD or HP website
(http://www.hp.com/go/rackandpower
).
Precautions
WARNING: A risk of personal injury from
electric shock and hazardous energy levels
exists. The installation of options and routine
maintenance and service of this product
must be performed by individuals who are
knowledgeable about the procedures,
precautions, and hazards associated with AC
power products.
75 kg
167 lb
This symbol indicates that the ERM
exceeds the recommended weight for
one individual to handle safely.
WARNING: To reduce the risk of
personal injury or damage to the
equipment, observe local occupational
health and safety requirements and
guidelines for manual material
handling.
CAUTION: Always plan the rack installation so that
the heaviest item is on the bottom of the rack. Install
the heaviest item first, and continue to populate the
rack from the bottom to the top.
ERM kit contents
• Important Safety Information guide
• This document
• Warranty information
• Rails, with mounting hardware for square- and
round-holed racks
• ERM
• Front bezel
• Rear mounting brackets, plates, and
associated hardware

HP UPS R5500 ERM Specifications

General

Topology	Double Conversion Online
Form Factor	Rack-mountable
Rack Size	3U
Extended Runtime	Yes
Intelligent Card Slot	Yes
Emergency Power Off (EPO)	Yes
Frequency	50/60 Hz
Battery Type	Sealed Lead-Acid (SLA)
Product Type	UPS
Typical Backup Time	Varies based on load
Interface Ports	USB, Serial
Weight	121.3 lbs (55 kg)

Summary

Precautions and Warnings

Handling and Safety Warnings

Key safety warnings regarding electrical shock, hazardous energy, and manual handling of the ERM unit.

Rack Installation Planning

Guidelines for planning rack installations, emphasizing placing the heaviest items at the bottom.

ERM Kit Components

Lists the included components and accessories for the ERM kit installation.

Installation Preparation

Site Selection Criteria

Details environmental and electrical factors to consider when selecting an installation site.

Tools and Materials Required

Lists the necessary tools and components provided for the installation process.

Equipment Readiness Steps

Steps to prepare the equipment for installation, including battery check and unpacking procedures.

Mounting Rail Installation

Mounting Rail Safety

Safety warnings and cautions to follow during the installation of mounting rails to prevent injury or damage.

Mounting Rail Setup

Instructions for adjusting and installing the mounting rails, including securing them to the rack.

Rail Preparation for Shipping

Specific steps for preparing mounting rails if the unit is to be shipped within certain HP racks.

ERM Installation and Configuration

UPS Power Down Procedure

Steps to safely shut down the UPS and connected loads before proceeding with ERM installation.

ERM Installation Safety

Key safety warnings and cautions related to installing the ERM unit into the rack.

Installing the ERM Unit

Detailed steps for physically installing the ERM chassis onto the mounted rails within the rack.

Attaching the ERM Front Bezel

Instructions for fitting and securing the front bezel to the installed ERM unit.

ERM Connectivity and Configuration

Connecting ERM to UPS

Instructions for connecting the ERM unit to the UPS using the provided cable.

Charging ERM Batteries

Guidance on charging the ERM batteries, emphasizing the need for a grounded outlet and sufficient charge time.

Configuring UPS for ERMs

Steps to configure the UPS settings, including nominal voltage and the number of attached ERMs.

UPS Front Panel Interface

UPS Front Panel Controls

Description of the function of each button on the UPS front panel.

UPS Front Panel LED Indicators

Explanation of the LED indicators and their associated meanings on the UPS front panel.