K
Kathleen SmithJul 29, 2025
What to do when HP UPS battery life ends?
- TThomas GriffinJul 30, 2025
When your HP UPS reaches the end of its battery life, contact your service representative for battery replacement.
To Next PageTo Next PageWhat to do when HP UPS battery life ends?
When your HP UPS reaches the end of its battery life, contact your service representative for battery replacement.
What to do if my HP Enterprise R1500 G4 is overloaded?
If your HP UPS is overloaded, it means the power requirements of the connected equipment exceed the UPS capacity (greater than 105% of nominal). To resolve this, remove some equipment from the UPS. The UPS will continue to operate, but may shut down if the load increases. The alarm resets once the overload condition is resolved.
How to fix HP Enterprise R1500 G4 when batteries are disconnected?
If your HP UPS doesn't recognize the internal batteries or indicates that the batteries are disconnected, verify that all batteries are properly connected. If the condition persists, contact your service representative.
General| Output Power Capacity | 1500 VA / 1350 W |
|---|---|
| Rack Height | 2U |
| Battery Type | Sealed Lead-Acid (SLA) |
| Interface | USB, Serial |
| Input Frequency | 50/60 Hz |
| Output Frequency | 50/60 Hz |
| Topology | Line Interactive |
| Wave Type | Sine Wave |
| Efficiency | Up to 98% |
| Form Factor | Rack-mountable |
| Battery Recharge Time | 3 hours |
| Transfer Time | 4-8 ms |
| Operating Temperature | 0°C to 40°C |
| Operating Humidity | 0% to 95% non-condensing |
| Nominal Input Voltage | 120V |
| Nominal Output Voltage | 120V |
Lists the standards the UPS conforms to, including UL and IEC.
Provides links to HPE EG regulatory notices for compliance information.
Explains common warning symbols used on the UPS for important information.
Guidelines for safe operation and connection of IT equipment to the UPS.
Handling and installation precautions for the UPS and batteries to prevent hazards.
Information on eco-design, substances, packing materials, and end-of-life disposal.
Physical specifications including weight and dimensions for different UPS models.
Identification and description of connectors and ports on the rear of the UPS.
Description of the UPS control panel buttons, indicators, and their states.
Explanation of the LCD display, operation status icons, and their meanings.
Navigating menus, display options, and user-configurable settings.
Steps for unpacking and verifying all UPS components and accessories.
Procedure for safely connecting the internal battery module before initial startup.
Instructions for installing the UPS on rails and establishing a proper ground connection.
Connecting communication cables and installing optional interface cards.
Procedures for starting the UPS and confirming normal operation status.
How the UPS operates on battery power, including low-battery warnings.
UPS behavior upon AC power restoration and using remote control functions.
Solutions for common UPS problems like battery, overload, and internal faults.
Guidance on how to update the UPS firmware via the HPE website.
Safety and step-by-step instructions for safely replacing battery modules.
Information on how to order spare parts and a list of available items.
Detailed technical specifications for HPE R1500 G4 NA, JP, and TWN UPS models.
Detailed technical specifications for the HPE R1500 G4 INTL UPS model.
How to contact HPE support, collect necessary information, and access documentation.
Methods for obtaining software updates and subscribing to alerts.
Information on customer self-repair programs and remote support services.
Information on chemical substances, REACH, RoHS, and environmental compliance.
Table detailing restricted substances in Taiwan as per RoHS regulations.
